Jual LTJ-8B1D-FA1D56 Power plant Boiler Booster Pump Mechanical Seal Jawa Tengah - Multi Control Indonesia | Indonetwork

LTJ-8B1D-FA1D56 Power plant Boiler Booster Pump Mechanical Seal

Last Update
26 / 06 / 2023
MinimumPurchase
1 Pcs
Visited
10 Times

Price
CALL  

Share

Add To Cart

Specification of LTJ-8B1D-FA1D56 Power plant Boiler Booster Pump Mechanical Seal

Browse through the extensive list of Mechanical & Electrical. Find the best offer from thousand of supplier in Indonetwork.
Description:

Power plant boiler booster pump mechanical seal LTJ-8B1D-FA1D56 is a precision product that must be handled with care. The sealing surface has been milled to a very flat state. During transportation, the sealing surface is provided with a protective device to prevent damage. When removing the device, care must be taken not to scratch or crush this surface.

Before installing the seal, it is necessary to:

1. Check whether the allowable deviation of the shaft sleeve diameter is ±0.05mm, and the ovality should not exceed 0.025mm;
2 Check that the surface precision of the shaft sleeve should be within 0.4-0.6um (profile arithmetic mean deviation) or more;
3. Check that there are no sharp or grinding edges on the surface of the shaft sleeve, as the static ring must pass through this surface;
4. It shall be ensured that the leading edge of the shaft sleeve through which the static ring must pass is cut diagonally at 10, to a length of 10mm, and rounded to 1mm;
5. Check whether the axial displacement of the pump shaft can not exceed the working position of the shaft by 0.08mm;
6. Check that the static rings are perpendicular, and that the grinding surfaces of the static rings and the shaft axis should be at 90° angles to each other Within 0.03mm of the dial gauge reading
7. Check whether the concentricity between the hole and shaft of the mechanical seal cover and the stationary ring should be within 0.05mm;

Clean the work surface and mechanical seal cover holes thoroughly and carefully. The working surface of the mechanical seal cover must be smooth

And the verticality of the shaft must be within 0.03 mm of the dial gauge reading:

The hole in the shaft sleeve 9 must prevent fluid from passing through. Check the axle sleeve O-rings to ensure they are not damaged and are kept clean.

Structural feature of power plant boller booster pump mechnical seal LTJ-8B1D-FA1D56

1. Single end face, packable, multi spring, with uniform force on the sealing surface. Easy to install and use

2. Auxiliary sealing ring is a special fluorine rubber O-ring (resistant to high temperature and pressure) Applicable medium: boiler high temperature water and other working conditions



Parameter:

1. Fixed substance content of It: 5%
2. Temperature: 280
3. Press It: 5.0MPa
4. The shaft diameter: 120mm
5. It's linear speed: 30mm
6. Main application: This seal is mainly used for front pump of power plant boiler.





There are also other models available.
Please chat/WA to 0858-7630-0414 (Fast response)
Show More

Multi Control Indonesia

Multi Control Indonesia adalah perusahaan yang bergerak di bidang penjualan kebutuhan industri, untuk semua jenis industri seperti textile, plastik, makanan & minuman, obat, pengolahan kayu, farmasi dan lain-lainnya, serta menjual berbagai kebutuhan untuk trainer pendidikan. Ada pun product-product yang dijual antara lain seperti Frequency Inverter ( VFD),  frequency inverter, AC Drives, frequency converters, frequency changers, adjustable speed drives (ASD), adjustable frequency drives (AFD), variable frequency drives (VFD), variable speed drives (VSD), Soft Starters, Soft Stop, Soft Starters for AC Motor, Motor Starters,  Motor Soft Starters, EMI filter, Input EMI Filters, Output EMI Filters, AC Choke, AC Reactor, Input AC Choke, Output AC Choke, Input AC Reactor, Output AC Reactor, DC Choke, DC Reactor, Input DC Choke, Output DC Reactor, Input DC Reactor, HMI, Human Machine Interface,PLC,Programmable Logic Controller, Servo Drive, Servo Motor, Servo Motor & Drive, Servo Motor & Drive, Dioda Module, Darlington, IGBT, Transistor Module, IPM Module, Rectifier Bridge, SCR,GTO & Dioda, Mosfet,Fanuc part, Elevator Board,Fuse, Melt Pressure transmitter, Melt Pressure tranducer, Pressure Sensor,Melt Pressure gauge,Level Transmitter,Differential Pressure transmitter,Mud Pressure Transmitter,Instrument,Diaphragm pressure gauge,Temperature Transmitter, segala model jenis sensor. Propeller flow meter,Ultrasonic Water meter,magnetic flow meter,Gas turbin meter,Radar level meter dan bekerja sama dengan beberapa merk terkenal seperti

ABB, SIEMENS, DANFOSS, VACON, SEW, LENZE, PETER ELECTRONIC, LEISTER, WATT DRIVE, KEB, BONFIGLIOLI, NORD, CAG ELECTRIC MACHINERY, INTECNO, SYCOTEC, KB ELECTRONICS,  TDE MACNO SPA, GEFRAN, CONTROL TECHNIQUES, PEPPERL FUCHS, GRUNDFOS, VEM MOTORS, BR INDUSTRI-ELEKTRONIK, RK ROSE+KRIEGER, CARLO GAVAZZI, LEROY SOMER, VERLINDE, TRANSTECNO, STAHL CRANE SYSTEMS GMBH, MIYACHI, DEMAG CRANES COMPONENTS, ABM, ROSSI, COGNITO QUAM, GE, AIRTECNICS, Delta, Teco, Toshiba, Mitsubishi, fuji, Yaskawa, Hitachi, Omron, Panasonic, HYUNDAI, LS/LG

Tujuan utama kami adalah untuk menyediakan kebutuhan sarana industri yang tepat dan lengkap dengan layanan yang komprehensif kepada pelanggan, tidak hanya sumber daya saham tetapi juga dukungan teknis dan keahlian teknik.
Show More
Premium Gold
14 Year
Villa Payung Indah B 27 - Kabupaten Semarang, Jawa Tengah, Indonesia -50265
Last Login 24 / 07 / 2023