Insulation Sets

Category
Last Update
24 / 06 / 2021
MinimumPurchase
1
Visited
58 Times

Price
CALL

Share

Add To Cart

Specification of Insulation Sets

Browse through the extensive list of Foam Insulation. Find the best offer from thousand of supplier in Indonetwork.
Insulation Sets
 
Insulation sets are often used in petrochemical applications electrically isolate two mating flanges to reduce the likelihood of creating a galvanic cell which would result in corrosion of the flanges and pipework. Insulation sets are also used to prevent the flow of electrostatic charge to reduce sparking in hazardous environments.
 
Insulation sets often comprise an insulating gasket and set of two insulation and two steel washers and one insulating sleeve per bolt.
 
VCS
 
The VCS insulation set is designed for Very Critical Service and uses a stainless steel core faced with glass reinforced epoxy (GRE) resin and utilises a spring energised PTFE seal. The high strength resin allows these gaskets to be used in very high pressure applications up to flange ratings of API 20,000. VCS has been designed to be used in both raised face and RTJ groove flanges and also mismatched combinations of the two flange styles.
 
VCS sets are supplied with GRE insulation washers which have greater compressive strength and resistance to cracking than commonly used materials such as reinforced phenolic resin.
 
VCFS
 
The VCFS insulation gasket is a development of the VCS design to make a fire-safe insulation set. The VCFS includes an additional coated metallic seal to retain the internal pressure along with the spring energised PTFE seal used in the VCS. VCFS uses coated metallic insulating washers to maintain compressive strength after being exposed to fire. The development of the high-strength coated steel washers removes the need for the use of an additional insulating washer.
 
VCFS is fire safe tested to API 6FB.
 
PGE
 
The PGE insulation set uses a machined, glass-reinforced epoxy (GRE) resin with an o-ring or spring energised seal. PGE can be used for flange ratings from class 150 to 600 and offers greatly improved compressive strength over conventional insulation sets with greater resistance to overcompression and cracking.
 
PGE can be constructed from standard G10 or high-temperature G11 resin with a seal ring which can be manufactured from a range of rubbers or PTFE. PGE insulation sets are supplied with GRE sleeves and washers with zinc plated steel backup washers.
 
PGE gaskets are supplied with GRE insulation washers with a greater compressive strength and resistance to cracking the commonly used materials.
 
Standard Insulation Sets
 
Neoprene-faced phenolic resin gaskets are often used in class 150 and 300 applications and for use between -40 and 100°C and often comprise a central gasket and two reinforced phenolic, two steel washers and one Mylar sleeve per bolt. Being an old design Neoprene-face d insulation sets are often only used for low pressure applications with low installation stresses and can manufactured in two styles Type E (full face gasket) and Type F (inside bolt circle gasket).
 
The insulation washers can be replaced with stronger G10 items with improved compressive strength. The insulating sleeves can also be supplied manufactured from phenolic resin or high-temperature Nomex fibre.
 
Type D Insulation Sets
 
Type D insulation gaskets use the same basic materials as the standard insulation sets but are designed for RTJ flanges they are manufactured from reinforced phenolic resin. Type D gaskets have an oval cross-section and are suitable for low pressure service up to ASME Class 600 rating applications.
 CALL INFO : 082111881099
Show More

REKA KARYA PACKING GASKET

REKA KARYA PACKING
-------------------------------
Perkenalkan kami dari toko REKA KARYA PACKING
kami bermaksud ingin menjadi rekan / mitra anda dan kami ini menjual bermacam macam packing gasket di antara nya sebagai berikut :

PACKING GASKET

Klingerit packing tombo type, 1000 , 1303, 1100, 1935, 1120, dll, Packing Valqua type 1500, 1501Ac, 6500 dll, Packing gabus karet,
Packing klinger sil C4400, 4403, 4200 dll, Packing klingerit kawat 1000, Garlock 1000, Asbestos jointing sheet, Asbes kain, Asbes tape,
Gland packing asbes, Piur ptfe, Kevlar , Steam packing, Rames packing, Rockwool sheet, Rockwool rool, Rockwool pipe, Steel wool
Veltwool, Kampas rem, Perrodo, Air filter, Gllas wool, Graphite sheet, Fibber sheet, Sigth gllas, Spiral wound gasket, DLL
Merk . TOMBO, VALQUA, FINE BEST, KLINGER, GARLOCK, CHESTERTON, DLL

ENGINEERING PRODUCT

Acrylic sheet, Mika, Acrylic rood, Acrylic pipe, Kaca temper, ptfe sheet, ptfe rood, Carbon teflon sheet, Carbon teflon rood,
Pertinak sheet, Navotek Sheet, Navotek rood, Uretan sheet, Uretan rood, Poly carbonate, PE sheet, PE rood, Nylon sheet, rood,
Resin fibber plate, Resin fibber rood, HDPE sheet, PE, Mc blue sheet, Mc blue rood, Brake lining, Kain pemanas ptfe, Cham pup,
Lem dowcorning, DLL.

RUBBER PRODUCT

Karet sintetis, Karet anti saptic, Karet hijau, Karet putih, Silicone sheet, Selang silicone, Silicone rood, Karet garis, Habasit, Inatex
Karet conveyor, Karet jerman, Karet benang, Spoon hitam, Spoon putih, Karet gabus, Spoon tahan panas DLL.

TERIMA PESANAN / PEMBUATAN

Packing flange standard, ANSI, JIS, PN, ASME, Ada lubang baut / Tampa lubang baut,
SPIRAL WOUND GASKET, ANSI, DN, PN, JIS, Material , SS, CARBON, TITANIUM, GRAPHITE

Demikian lah product yang kami tawarkan dan masih banyak yang lainnya yang kami tidak bisa sebutkan satu persatu, sudi kira nya bapak / ibu dari perusahaan manapun mau bekerja sama dengan kami, atas kerja samanya kami ucapkan terima kasih

salam kami

choerudin

ANDA MEMESAN KAMI SIAP ANTAR SAMPAI TUJUAN
KEPUASAN ANDA KUNCI KESUKSESAN KAMI

UNTUK PEMESANAN / INFO HUBUNGI : choerudin
Alamat : pertokoan glodok jaya lt2 blok c no 6
telp : 021-6230 9796-02199149925-
fax : 021-6230 9796
hp : - 082111881099- 081808086382
pin bb-5B40F05C
Show More
Premium Gold
10 Year
Harco Glodok lantai 5 blok D no 47 - Kota Administrasi Jakarta Barat, dki-jakarta, Indonesia -11830
Last Login 19 / 07 / 2022